- Copper connectors and joints (8)
- Aluminium connectors and joints (3)
- Bimetallic connectors and joints /welding/ (5)
- Insulated terminals (5)
- Photovoltaic connectors MC4 (4)
- Connectors and fittings (4)
- Personal protection (6)
- Dielectric gloves and accessories (9)
- Dielectric boots and overboots (5)
- Insulating poles and accessories (9)
- Voltage detectors (5)
- Earthing and short circuit protection equipment (8)
- Insulation (5)
- Climbing irons and harness and belts (5)
- Bird anti-collision devices (2)
- Polyester-fiberglass ladders (7)
- Tools (0)
- Rescue panoplies (6)
- Plastic seals (19)
- Metal seals (8)
- Security envelops and labels (2)
Products
Bimetallic cable lug - TBF
TBF bimetallic cable lug manufactured from aluminium alloy of purity equal or higher than 99.5%. The palm is manufactured with forged copper. The two parts of the bimetallic cable lug are joined through a friction stir welding process. Incorporates neutral grease to avoid aluminium oxidation.
Low voltage bimettalic joint - MBI
MBI bimetallic joint manufactured from aluminium alloy of purity equal or higher than 99.5% and electrolytic copper tube. The two parts of the bimetallic connector are joined through a friction stir welding process. Incorporates neutral grease in the aluminium part hole to avoid its oxidation.
Medium voltage bimettalic joint - RJAU
RJAU bimetallic joint manufactured from aluminium alloy of purity equal or higher than 99.5% and electrolytic copper tube. The two parts of the bimetallic connector are joined through a friction stir welding process. Incorporates neutral grease in the aluminium part hole to avoid its oxidation.
Bimetallic cable lug - TDC/S
TDC/S bimetallic cable lug manufactured from aluminium alloy tube of purity equal or higher than 99.5%. The complete cable lug surface is tinned by means of an electrolytic process. According to UNE 211024 standard. Have AENOR certificate mark.
Bimetallic cable lug - TDC/A
TDC/A bimetallic cable lug manufactured from aluminium alloy tube of purity equal or higher than 99.5%. The complete cable lug surface is tinned by means of an electrolytic process. It is especially designed for overhead cable connections.